OAQ Process Information Application PI-03 Storage And Handling Of Bulk Material {52543}

Indiana Department of Environmental Management Office of Air Quality Air Permit Application Page 1 of 3 PI-03 Instructions 5/2006 PROCESS INFORMATION: Storage & Handling of Bulk Material ­ INSTRUCTIONS Microsoft Word version of PI-03 Adobe PDF version of PI-03 The purpose of PI-03 (state form 52543) is to obtain detailed information about the storage and handling of bulk materials. Complete one form for each process (or group of identical processes). PI-03 is a required form for all air permit applications submitted to IDEM, OAQ. For the purposes of this form, the term "source" refers to the plant as a whole and NOT to the individual emissions units. If you do not provide the enough information to adequately describe the process, the application process may be stopped. If you have any questions, contact the Air Permit Reviewer of the Day (PROD) at (317) 233-0178 or 1-800-451-6027 extension 3-0178 (toll free call within Indiana). Part A: Storage and Handling Information Part A identifies the process. If there are multiple process units that are identical in nature, capacity, and use, you may use one form to summarize the data for the identical process units. 1. Equipment / Component Type: List the equipment or component type. 2. Unit ID: For each equipment or component type listed, provide the identification number(s) for the process unit(s). Please list each emission unit on a separate row, unless they are identical. The identification numbers listed on this form should correspond to the emissions unit identified on the Plant Layout and Process Flow diagrams. 3. How many identical units are identified in this form? For each equipment or component type listed, indicate whether the row identifies one process unit, or a number of identical process units. Identical units must be of the same type, capacity, and installation date. If more than one identical unit, specify the number of units in the space provided. 4. Installation Date: For each emission unit listed, provide the date on which the unit was installed. If the exact date is not known, provide the month and year of the installation. If the unit has not yet been installed, provide the anticipated installation date. If the unit has been modified since the original installation, include the most recent modification date. 5. Material Handled / Stored: For each equipment or component type listed, identify the materials handled or stored. 6. Maximum Materials Throughput Rate: For each material handled or stored, provide the maximum throughput rate in tons per year (tpy). 7. Add-On Control Technology: Identify all control technologies used for this process, if applicable. A Control Equipment (CE) application form will need to be completed for each control device used, and a summary of control equipment should be submitted using form CE-01. 8. Control Techniques: Identify all control techniques used for this process. 9. Process Limitations / Additional Information: Use the space provided to identify any acceptable process limitations or to provide additional information. An example of an acceptable process limitation would be taking a limit on raw material usage. Such a limit would require an additional record keeping and reporting requirements to be enforceable. For some limitations, performance testing may also be required. Any future change to the established limit will require a permit modification. American LegalNet, Inc. www.FormsWorkflow.com Indiana Department of Environmental Management Office of Air Quality Air Permit Application Page 2 of 3 PI-03 Instructions 5/2006 Part B: Process Material Information Part B identifies the materials processed and the raw material usage. 10. Material Handled / Stored: Identify all materials handled or stored. 11. Method of Handling: Specify the method used to handle the materials listed. 12. Type of Storage: Specify the type of storage used for the materials listed. 13. Storage Capacity: For each of the materials stored, provide the storage capacity in tons. 14. Pile Acreage: For each of the materials that reside in a storage pile, provide the pile acreage. 15. Silt Content: For each of the materials processed, provide the silt content in percent by weight (%). 16. Moisture Content: For each of the materials processed, provide the moisture content in percent by weight (%). Part C: Emission Factors Part C identifies the emission factors used to calculate air emissions from this process. 17. Process Equipment & ID: Identify the process and include the identification number for the unit, if applicable. 18. Air Pollutant: For each process identified, list each air pollutant emitted to the atmosphere during normal operation. If there are multiple pollutants for an process, use a new row for each pollutant. 19. Emission Factor: Provide the relevant emission factor including the appropriate units (e.g., lb/units, lbs/ton, lbs/gal, lbs/cf, etc.). 20. Source of Emission Factor: Provide the source of the emission factors. Common sources include AP-42, stack test data, engineering analysis. The United States Environmental Protection Agency (U.S. EPA) has developed a Clearinghouse for Inventories & Emission Factors containing AP-42 and other emission factors. Appendix A of AP-42 lists several common conversion factors that may be needed to calculate potential to emit. Part D: Federal Rule Applicability Part D identifies any federal rules that apply to the process. 21. Is a New Source Performance Standard (NSPS) applicable to this source? Specify whether a New Source Performance Standard (NSPS) is applicable to the process unit(s). If a New Source Performance Standard (NSPS) applies, list the rule citation and title in the space provided and submit a FED-01 form to identify the applicable portions of the rule. 22. Is a National Emission Standard for Hazardous Air Pollutants (NESHAP) applicable to this source? Specify whether a National Emission Standard for Hazardous Air Pollutants (NESHAP) is applicable to the process unit(s). If a National Emission Standard for Hazardous Air Pollutants (NESHAP) applies, list the rule citation and title in the space provided and submit a FED-01 form to identify the applicable portions of the rule. The United States Environmental Protection Agency (U.S. EPA) provides lists of NESHAP on the Rules and Implementation section of the Air Toxics Website. American LegalNet, Inc. www.FormsWorkflow.com Indiana Department of Environmental Management Office of Air Quality Air