Indiana > Statewide > Department Of Enviromental Management > Air

OAQ Process Information Application PI-17 Blasting Operations 52558 - Indiana

OAQ Process Information Application PI-17 Blasting Operations Form. This is a Indiana form and can be used in Air Department Of Enviromental Management Statewide .
 Fillable pdf Last Modified 8/25/2010
Get this form for FREE as a print-only pdf

Indiana Department of Environmental Management Office of Air Quality Air Permit Application Page 1 of 3 PI-17 Instructions 10/2006 PROCESS INFORMATION: Blasting Operations­ INSTRUCTIONS Microsoft Word version of PI-17 Adobe PDF version of PI-17 The purpose of PI-17 (state form 52558) is to obtain detailed information about the blasting operations. Complete one form for each process (or group of identical processes). PI-17 is a required form for all air permit applications submitted to IDEM, OAQ. For the purposes of this form, the term "source" refers to the plant as a whole and NOT to the individual emissions units. If you do not provide the enough information to adequately describe the process, the application process may be stopped. If you have any questions, contact the Air Permit Reviewer of the Day (PROD) at (317) 233-0178 or 1-800-451-6027 extension 3-0178 (toll free call within Indiana). Part A: Blasting Process Information Part A identifies the blasting process. If there are multiple processes that are identical in nature, capacity, and use, you may use one form to summarize the data for the identical processes. 1. Unit ID: Provide the identification number for the unit. The identification numbers listed on this form should correspond to the emissions unit identified on the Plant Layout and Process Flow diagrams. 2. Installation Date: Provide the date on which the process unit was installed. If the exact date is not known, provide the month and year of the installation. If the unit has not yet been installed, provide the anticipated installation date. If the unit has been modified since the original installation, include the most recent modification date. 3. How many identical process units are identified in this form? Indicate whether this form identifies one process unit, or a number of identical process units. Identical units must be of the same type, capacity, and installation date. If more than one identical unit, specify the number of units in the space provided. 4. Type of Unit: Specify the type of blasting process unit. If none of the listed categories or subcategories is applicable, specify the blasting type under the "other" option. 5. Blasting Area: Specify whether the blasting area is open or totally enclosed. 6. Add-On Control Technology: Identify all control technologies used for this process, if applicable. A Control Equipment (CE) application form will need to be completed for each control device used, and a summary of control equipment should be submitted using form CE-01. 7. Control Techniques: Identify all control techniques used for this process. 8. Process Limitations / Additional Information: Use the space provided to identify any acceptable process limitations or to provide additional information. An example of an acceptable process limitation would be taking a limit on raw material usage. Such a limit would require an additional record keeping and reporting requirements to be enforceable. For some limitations, performance testing may also be required. Any future change to the established limit will require a permit modification. Part B: Blast Media Information Part B details information about the blast media. American LegalNet, Inc. www.FormsWorkflow.com Indiana Department of Environmental Management Office of Air Quality Air Permit Application Page 2 of 3 PI-17 Instructions 10/2006 9. Blast Media: Identify each blast media used in this process. 10. Media Density: For each blast media listed, specify the media density in units of pounds per cubic foot (lb/ft3). 11. Nozzle Internal Diameter: For each pneumatic blasting unit, specify the internal diameter of the nozzle in inches (in). 12. Media Density: For each mechanical blasting unit, specify the nozzle pressure in pounds per square inch (psig). 13. Media Density: For each mechanical blasting unit, specify the blasting rate in units of pounds per hour (lb/hr). Part C: Emission Factors Part C identifies the emission factors used to calculate air emissions from this process. 14. Process Unit: Identify the process and include the identification number for the unit, if applicable. 15. Air Pollutant: For each process identified, list each air pollutant emitted to the atmosphere during normal operation. If there are multiple pollutants for a process, use a new row for each pollutant. 16. Emission Factor: Provide the relevant emission factor including the appropriate units (e.g., lb/units, lbs/ton, lbs/gal, lbs/cf, etc.). 17. Source of Emission Factor: Provide the source of the emission factors. Common sources include AP-42, stack test data, engineering analysis. The United States Environmental Protection Agency (U.S. EPA) has developed a Clearinghouse for Inventories & Emission Factors containing AP-42 and other emission factors. Appendix A of AP-42 lists several common conversion factors that may be needed to calculate potential to emit. Part D: Federal Rule Applicability Part D identifies any federal rules that apply to the process. 18. Is a New Source Performance Standard (NSPS) applicable to this source? Specify whether a New Source Performance Standard (NSPS) is applicable to the process unit(s). If a New Source Performance Standard (NSPS) applies, list the rule citation and title in the space provided and submit a FED-01 form to identify the applicable portions of the rule. 19. Is a National Emission Standard for Hazardous Air Pollutants (NESHAP) applicable to this source? Specify whether a National Emission Standard for Hazardous Air Pollutants (NESHAP) is applicable to the process unit(s). If a National Emission Standard for Hazardous Air Pollutants (NESHAP) applies, list the rule citation and title in the space provided and submit a FED-01 form to identify the applicable portions of the rule. The United States Environmental Protection Agency (U.S. EPA) provides lists of NESHAP on the Rules and Implementation section of the Air Toxics Website. 20. Non-Applicability Determination: Provide an explanation of non-applicability if the process unit would appear to be subject to a rule (based on the rule title of affected source category), but the rule will not apply to the process. For example, if the process unit is part of the source category subject to a rule, but the process unit in question is not subject to the rule, state the reason why the unit is not subject. ***SUBMISSION OF CONFIDENTIAL RECORDS*** All information submitted to IDEM will be made available to the public unless it is submitt
Link/Embed this Document
URL
Embed


Popular Searches

  1. petition for termination of parental rights
  2. visitation
  3. notice of hearing
  4. Ex Parte
  5. dismissal
  6. writ of execution
  7. financial affidavit
  8. Declaration
  9. civil cover sheet
  10. SUBSTITUTION OF ATTORNEY

Bookmark and Share